Fly Fishing Traditions

Fly Fishing Traditions Blog and Website
"It's about Life & Fly Fishing"

Tuesday, April 1, 2014

FFT Techniques - Swinging for Trout - With a Trout Rod

How to do it!

When trout fishing, the environment is an ever-changing world and versatility in fishing methods is advantageous to the success of an angler.

One of the many techniques that we use to target trout in the lower Yuba River is to swing flies. For our purposes for right know we'll assume you're fishing with an all around 6 weight trout rod. For those of you fishing with a 5 weight rod don't worry it'll still work. We'll get into used a larger switch rod for swinging flies another day.

When wade fishing is available, swing flies can be very effective for hunting up bigger fish using a streamer pattern, or larger soft hackles on a sink tip.

Unlike some nymphing techniques or dry fly fishing where there are advantages to start from below and work up a run, when swinging you start in at the top of the run and work down, so don't allow your fishing buddies to drop below you and start nymphing.

One thing to keep in mind is the size of the fly and the density of the sink tip. Use a tip with a sink rate appropriate for the depth and current speed of the run you are fishing. Some people recommend buying a multi-tip line, which is a great system to have when swinging different types of water. But I've found that on the Yuba a line similar to a Teeny 200 or Teeny 300 works fine. Or, too keep it simpler yet buy a sink tip line that has a sink tip 15 feet long and has a Type 4 sink rate. So enough about lines.

As far as the size of the fly, think about a small minnow swimming in the river. In heavy water a small fish would tend to be swept downstream as it would not be strong enough to swim against the current, but a larger minnow would. As the minnow finds its way to softer or slower water it would be able to swim more easily and escape harms way.

So with this said, cast the fly across the current with a slight angle to 45 degrees downstream. As the fly line hits the water, make an upstream mend in the line and hold the rod tip out in front of you. As the line begins to straighten out the fly will begin to sink and literally “swing” across the current as it moves downstream through the water column. It is not always necessary to make an upstream mend; this depends on current speed, depth of the run, size of the fly and sink tip. At times, you may even need to mend downstream, putting belly in the line – for instance if the current is too slow to swing the fly.

This can be explained as filling a sail with wind to push a boat. By mending a belly into the line, you fill the line with current and this will push the fly line and pull the fly across and through the softer water. Even stripping the fly at the end of the swing can be effective.

Many times a fish will follow the fly, observing, until taking it or rejecting it. Generally when swinging flies you don’t see the fly or the fish. One can only imagine and guess what is taking place under the surface.Think about being a minnow in a big river, with big fish that want to eat you! Let you flies dangle at the end of the swing lift the rod up and down to tempt ant following fish. If nobodies home, take a step or two down stream and make another cast.

Start at the top of a run and swing flies taking a step or two after each cast and you may catch one of the largest fish in the river!

Get into the swing of things. It's a fun way to work a run.


  1. Clay, if you plan to use multiple flies, I assume you use the heaviest fly as the point fly, and do you recommend tying the point fly off the bend of the dropper fly or using the tag end of a double surgeon?

    Thanks Bob F

  2. Mister BuggerBob,

    When using this technique the point fly, which is the closest to the fly line, is typically the biggest, I usually want a very bouyant fly, that is visible and may be impressionistic rather than imitative. This could be a foam stonefly, or an "Indicaddis" or with a mayfly hatch my favorite a Quigleys Cripple. This fly is really and indicator fly and lets me keep track of where the trio of flies are located in the drift. I tie the second fly off a long tag from a double surgeons knot. Imagine a letter "f" whith the vertical portion of the "f" being the extended tippet and the the short horizontal sections of the "f" being the tage to the dropper flies. The "Indicator" or point fly is also on a tag. So in summary, the point fly is the largeset and is a dry fly, emerger or cripple, the second dropper fly is typically and attractor or imatitative nymph and the last fly is a soft hackle to match the hatch.

    I hope this helps, if not, please call or email me and we'll get together for a hands on lesson, free of charge of course.

    The Big Kahuna, Clay



Have any Questions or Comments? Let me know, Clay.